Application Instructions

The final result of the touch up depends upon the application procedure of Color-on Premium Spray Paint. The result may vary due to many factors such as atmospheric conditions, type of surface etc.

We are enlisting below a specific procedure for applying Color-on Premium Spray Paint that would give best results if properly followed.

Directions to Use

Check Color: Before using compare the color of the substrate with the color marked on the Color-on Can.

Prepare Surface: Clean the surface thoroughly using a soft cloth to remove dirt, dust, grease etc from the surface.

Wet sand the surface using 1500 no. Water proof emery paper for a proper, uniform and smooth finish and dry the surface using a soft cloth.

Spraying Instructions:

• Shake the can vigorously until the agitator ball moves freely.
• Hold the Can straight in upright position and spray a few puffs in air so that the paint starts flowing.
• Spray from a distance approx. 10” - 12” from the surface to avoid dripping of paint
• 1. Apply light coats till the you get the the desired level of matching. Wait for 2 minutes between coat.
• In case the paint shade appears to get darker, simply remove the paint sprayed using ordinary NC Thinner and retouch up it.
• Once the paint is sprayed, wait for 5 - 10 minutes and wet sand the surface with a 2000 no. emery paper to remove over spray and get a smooth finish (This step is optional)
• Finally, apply some good quality rubbing compound followed by polishing the surface with a wax polish.
• Clean the spray button after use. If spray button clots, rinse it in thinner and replace